The C-shaped steel is automatically formed by the C-shaped steel forming machine. The C-shaped steel forming machine can automatically complete the C-shaped steel forming process according to the given C-shaped steel size.

Manufacturing processes

Unwinding ①—— Leveling ②—— Forming ③—— Forming ④—— Straightening ⑤—— Length measurement ⑥—— Punching the round hole of the rib ⑦—— Punching the elliptical connecting hole ⑧—— Forming and cutting off ⑨

C shape steel profile

Galvanized C-shaped steel, hot-dip galvanized cable tray C-shaped steel, glass slot C-shaped steel, glass curtain wall C-shaped steel, cable trough C-shaped steel, reinforced C-shaped steel, double hug C-shaped steel, single-sided C-shaped steel, manual forklift C-shaped steel, C-shaped steel with unequal sides, C-shaped steel with straight edge, C-shaped steel with beveled edge, C-shaped steel with inner curling edge, C-shaped steel with inner beveled edge, C-shaped steel of roof (wall) purlin, C-shaped steel of automobile profile, C-shaped steel of expressway column, solar support C-shaped steel (21-80 series), formwork support C-shaped steel, precision C-shaped steel for equipment, etc.

Specification category

shaped steel purlins are divided into five specifications of 80, 100, 120, 140, and 160 according to different heights. The length can be determined according to the engineering design, but considering the conditions of transportation and installation, the total length is generally not more than 12 meters.

Scope of application

shaped steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light industry manufacturing, etc.

The purlins of c-shaped steel can be divided into five specifications: 80, 100, 120, 140, and 160 according to the height, and the length can be determined according to the design of the project, but considering the conditions of transportation and installation, the total length generally does not exceed 12 Meter.

C-section steel is a kind of section steel through cold-bending technology. It has high dimensional accuracy, and all its surfaces are covered with zinc layers, so the zinc content on its surface is usually 120-275g/㎡; and its cross-section Although the size is light, it is very in line with the stress characteristics of the roof purlin, so that the mechanical performance of the steel can be fully utilized. The use of profiled steel purlins can reduce the weight of building roofs, reduce the amount of steel used in engineering, and have a beautiful appearance. It is a new building material that replaces traditional steel purlins.

What are the advantages of c-section steel?

1. The design of c-section steel is flexible. Even with the same beam height, the bay of the steel structure can be 50% larger than the bay of the concrete structure, which makes the subsequent construction and placement more flexible.

2. Compared with the concrete structure, the structural self-weight of the c-section steel is relatively light. The reduction of the structure's own weight can reduce the internal force of the structure design, reduce the demand for the basic treatment of the building structure, and reduce the construction cost and the simplicity of the construction.

3. Compared with the concrete structure, the section area of the steel structure column is small, which can increase the useful usable area of the building, so that the construction method is different, adding 4-6% of the useful usable area.

4. Compared with welded c-section steel, it can obviously save labor and material, reduce the consumption of raw materials, power and labor, low residual stress, and good appearance and surface quality.

5. The steel structure based on hot-rolled c-section steel is scientific and reasonable, with good plasticity and flexibility, and high structural stability. It is suitable for building structures that accept large vibration and impact loads, and has strong resistance to natural disasters. It is especially suitable for some buildings with multiple earthquake occurrence zones.

6. It is convenient for machining, structural connection and installation, and easy to remove and reuse.

The  c profile steel beam is automatically formed by the C-shaped steel forming machine. It can be widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. So what are the advantages and characteristics of C-shaped steel used in seismic support? 1C-shaped steel, as the basic force-bearing component of the support and hanger, can be flexibly configured with various components to form a complete structural support system; 2. It can be connected with various structural components such as walls, floors, ceilings, concrete, and steel structures;

 c profile steel beam purlins are divided into five specifications of 80, 100, 120, 140, and 160 according to different heights. The length can be determined according to the engineering design, but considering the conditions of transportation and installation, the total length is generally not more than 12 meters.

Due to the characteristics of galvanized C-shaped steel, it is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components, and can also be used for columns in mechanical light industry manufacturing. , beams and arms, etc. And our anti-seismic supports and hangers also use galvanized C-section steel as the main material.

Galvanized C-shaped steel has the advantages of adjustable size and high compressive strength. Although the section size of the section steel formed by cold bending is light, it conforms to the stress characteristics of the roof purlin, so that the mechanical performance of the steel can be fully utilized. A variety of accessories can also be connected into different combinations, with beautiful appearance. The use of profiled steel purlins can reduce the weight of building roofs and reduce the amount of steel used in engineering, so it is also called economic steel, which is an alternative to channel steel, angle steel, steel pipe, etc. A new building material for traditional steel purlins. The galvanized C-shaped steel used in our anti-seismic support and hanger has a smooth surface, uniform zinc layer, strong adhesion, and all surfaces are wrapped with zinc layer, which has a long service life, corrosion resistance and durability.