Galvanized C purlin factory refers to a new type of steel made of high-strength steel plate, cold-formed and roll-formed, with uniform wall thickness, excellent cross-sectional properties, and high strength. Compared with traditional hot-rolling, the same strength can save 30% of materials.

Galvanized C-shaped steel has the advantages of adjustable size and high compressive strength. Although the section size of the section steel formed by cold bending is light, it is very suitable for the stress characteristics of the roof purlin, so that the mechanical performance of the steel can be fully utilized. A variety of accessories can be connected into different combinations, with beautiful appearance. The use of profiled steel purlins can reduce the weight of building roofs and reduce the amount of steel used in engineering, so it is called economical and efficient steel. It is an alternative to traditional steel such as angle steel, channel steel and steel pipe. A new type of building material for purlins.

The main advantages of galvanized C-section steel are:  

1. Durability: In urban or offshore areas, the standard hot-dip galvanized anti-rust layer can be used for 20 years; in the suburbs, it can be used for more than 50 years. 

2. Comprehensive protection: Each part can be plated with zinc for comprehensive protection. 

3. The toughness of the coating is strong: it can withstand mechanical damage during transportation and use.

4. Good reliability. 

5. Time-saving and labor-saving: The galvanizing process is faster than other coating construction methods, and it can avoid the time required for painting on the construction site after installation. 

6. Low cost: The said galvanizing is more expensive than painting, but in the long run, the cost of galvanizing is still low, because galvanizing is durable and durable

Galvanized C-shaped steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light industry manufacturing, etc.

Outstanding features: galvanized C-shaped steel, uniform zinc layer, smooth surface, strong adhesion, high dimensional accuracy, all surfaces are wrapped by zinc layer, surface zinc content is usually 120-275g/㎡, long service life, corrosion resistance and durability , is a kind of galvanized C-shaped steel with the strongest protection.

section steel is widely used in the steel structure of purlins and wall beams, and can also be combined into building components such as light roof trusses and supports. It can also be used for columns, beams, arms, etc. in mechanical light industry manufacturing. C-section steel is formed by cold bending of hot-rolled steel plate. It has the characteristics of thin wall, light weight, excellent section performance and high strength. Compared with traditional channel steel, the same strength can save 30% of material.

Friends will ask, there are so many advantages and uses of c-section steel. The c-shaped steel belt has good performance and saves materials. What material is this made of? Is this galvanized carbon steel? C-section steel is usually painted with color steel. So what is pre-painted steel? The surface of the steel is coated with an organic coating. Cold-rolled strip and galvanized strip (electrogalvanized and hot-dip galvanized) serve as substrates for continuous plants. After surface pretreatment (degreasing, chemical treatment), one or more liquid coatings are carried out by roll coating method, and the plate obtained by baking and cooling is a coated steel plate. Since the coating can have different colors, coated steel is often called color coated steel. Since the coating is carried out before the steel plate is formed, it is called a pre-coated steel plate abroad. Color-coated steel plate has the advantages of beautiful appearance, bright colors, high strength, good corrosion resistance, and convenient processing and forming. It also allows users to reduce costs and pollution. This enables products made of organically coated steel sheets to have excellent practicality, decoration, workability and durability. It will be a strip material for c-section due to its many advantages.

With the development of my country's economic construction, environmental protection and green building materials are also developing rapidly. The production technology and process of Tianjin section steel have been greatly improved, and the current development situation is relatively good. Generally used for wall beams in buildings, mainly because it has great advantages, mainly reflected in the following aspects:

1. It is very light in weight. Since it is made of hot rolled steel sheet, it has the advantage of light weight. Compared with concrete, structural planning is reduced and the construction process is relatively simple.

2. It has good flexibility, scientific and reasonable internal structure and high stability. It can usually be used to accept large oscillations, and the ability to resist natural disasters is also relatively strong.

3. Save time and effort. In the welding process, materials can be significantly saved and a certain amount of manpower and material resources can be reduced. In the process of processing, it also has the advantages of easy processing, disassembly and recycling.

Although it has advantages, it also has some disadvantages, such as delamination after hot rolling. Residual stresses can also develop if uniform cooling is not performed after machining. In general, its own advantages are enough to cover up its shortcomings.

Due to these shortcomings, c-beams have been continuously improved in production and application and have been widely used.

Price advantage: The price of 2X4 c-section steel will be relatively optimal under the premise of ensuring quality. The specific quotation should be adjusted according to the specific specifications and products.

Now c-section steel is widely used. Because of its strong firmness and stability, it can be used as purlins and supports for steel structures.

C-section steel is mainly used for:

steel structure. In addition to purlins, it can also be used as steel structure brackets, beams, ties, etc.

Strip steel use:

Welded pipes, other cold-formed steels, packing tapes, highway guardrails, etc.2X4 C purlin price is competitive.