Sino Green New Energy Tech Co Ltd
+86-22-23869896
Home / News

Solar panel roof mounting system are very popular in China.It can be installed on corrugated roofs or other tin roofs. Can be used with m10 × 200 hanger bolts to have enough space with the roof. Curved rubber pads are specially designed for corrugated roofs.The product has the advantages of pre-assembly, easy installation, improved output power, wide application range, safety and reliability, etc.

Specializing in the production of solar photovoltaic bracket manufacturers, mainly engaged in the research and development, production and sales of photovoltaic bracket systems. Adhering to the business philosophy of promoting and popularizing the application of clean energy, we have successively launched a series of high-quality and innovative products such as pitched roof brackets, adjustable-angle roof brackets, flat roof brackets, ground brackets, and column brackets by integrating various resources at home and abroad. Mainly used in industrial plants, commercial buildings, residential roofs, agricultural facilities, remote areas, etc.


The construction project is suitable for the installation of major public facilities such as medical and health care, public facilities, and parking lots related to earthquakes and natural disasters, with both safety and comfort.


The iconic status of this technology is the effective improvement of the standardization of photovoltaic power plants, which has obvious market advantages. This new technology uses aerodynamic principles and technologies such as storage, induction and application of photovoltaic reflections to change the traditional way of generating electricity. and humane way.


According to professional designers, this kind of roof can achieve the effect of heat insulation and cooling, and the indoor surrounding environment is greener. Modular solar panel mounting system is green enough.No matter where the roof is, the design is good-looking and healthy. is a good choice. But where will the roof be built? According to our original construction experience, such a situation is often found on the construction site. In addition to the places that need to be paid attention to in the design of the roof, each place has its own construction experience, so that when there is a problem with the design, it can avoid backfire.


Photovoltaic bracket steel


Put them on each wall outside. In the same way as the partitioning of the indoor photovoltaic system, it is recommended to divide the load-bearing wall into two pieces, plus the location of the road and balcony, so that the selected front photovoltaic system can be concentrated in a small room with a small area.

Since C-shaped steel for solar photovoltaic brackets has only been developed in China in the past two years, it is not enough for some friends to be unfamiliar with it. The so-called solar photovoltaic bracket C-shaped steel, as the name suggests, is a product component provided by the solar bracket factory for solar energy companies. It is a special bracket designed for placing, installing and fixing solar panels.


     Everyone should know more about solar energy. It is an environmentally friendly and infinite resource. Therefore, C-shaped steel for photovoltaic brackets in Tianjin was born. It has no welding, no drilling, 100% adjustable, and 100% repeatable characteristics, so it is widely used Used in civil, industrial solar photovoltaic and solar power plants. The main types are solar thermal brackets (solar water heater brackets) and solar photovoltaic brackets. Of course, what kind of solar photovoltaic bracket C-shaped steel should be selected according to the different places.


     In addition to the above-mentioned characteristics of C-shaped steel for solar photovoltaic brackets, what makes it develop rapidly? It is the advantages of stable performance, easy installation and strong bearing capacity. Knowing this knowledge, you will also be guaranteed when you purchase C-shaped steel for solar photovoltaic brackets.

With the rapid development of the photovoltaic industry, C-shaped steel for solar photovoltaic brackets has become more and more familiar to people. Nowadays, solar photovoltaic brackets are developing into an independent small industry, and it is not easy to find a professional manufacturer of solar photovoltaic brackets. However, Tianjin Zhihao has advanced production equipment and humanized high-quality service. Tianjin solar photovoltaic bracket C-shaped steel is definitely your safe choice.C channel profile manufacturers are ourselves.

No matter what product, most friends may first ask about the price. Is the price of Tianjin C-beam the lowest? This is not absolute. Since the current steel market is fickle, the quotations of C-beams in various places also change at each time period, so the Tianjin C-beam market is the same. You may ask, what advantage does Tianjin C-beam price have? The reason why Tianjin C-beam price has an advantage is that the price of raw materials in the market is low, and the cost is lower than other cities. Of course, it has an advantage in price.


     Of course, Tianjin C-beams with low price and poor quality will still be ignored. In addition to the quality of raw materials, the quality of C-beam steel is also determined by the manufacturer's production equipment. Raw materials are purchased according to customer requirements, and manufacturers must carefully select them from buyers. Tianjin Zhihao C-shaped steel is automatically processed by C-shaped steel forming machine. As long as the given C-shaped steel size is input, it can be directly formed. The product has beautiful appearance, precise and accurate size, and reasonable design. It not only saves manpower and material resources for customers, but also saves money. Importantly, costs are also reduced.


     Also, there are more complete types of C-beams in Tianjin. At present, the application of C-shaped steel has reached more than a dozen different fields. Of course, it is impossible to only have C-shaped steel. Tianjin Zhihao main product names: galvanized C-shaped steel, hot-dip galvanized C-shaped steel, roof (wall) purlin C-shaped steel, support C-shaped steel Compared with traditional channel steel, the same strength can save 30% of materials.


     In fact, the advantages of Tianjin C-section steel are more than these. It can be seen that Tianjin C-section steel has a relatively high status in the domestic steel market. If you want to know about Tianjin C-section steel or more steel content, Tianjin sino green welcomes you.

Photovoltaic products are a major trend in the future, and will become more popular in the future, entering thousands of households.

CONTACT US

+86-22-23869896
+8618622088833(WhatsApp)
23rd, Floors, Science and Technology Finance Buildling. No.5, Meiyuan Road, Xiqing District, Tianjin,China.

SOCIAL MEDIA

Sino Green New Energy Tech Co Ltd